Coarse filter cake discharging cleanly from a press
Filter Cloth

Monofilament Filter Cloth

Stable aperture for coarse, free-draining solids

Single-filament cloth with a defined aperture, for crystalline and coarse solids that release easily.

Fibre
Polyamide (PA) or PET monofilament
Weave
Plain, satin
Aperture
50 – 500 µm
Air permeability
80 – 300 L/m²/s

Typical configuration shown. Final specifications confirmed on the approved drawing.

Overview

Where this model fits

Monofilament cloth keeps a consistent aperture, so filtrate flow stays predictable through the cycle. It suits crystalline, granular and coarse mineral solids where blinding is the main risk. Because the aperture is fixed, particle size must be checked before selection.

Technical parameters

Swipe to see all specifications on mobile

ParameterTypical configuration
FibrePolyamide (PA) or PET monofilament
WeavePlain, satin
Aperture50 – 500 µm
Air permeability80 – 300 L/m²/s
pH range3 – 10
TemperatureUp to 110 °C
WidthUp to 2.0 m

Cycle, step by step

  1. 01

    Size

    Aperture is matched to the smallest particle to be retained.

  2. 02

    Install

    Cloth is tensioned evenly across the plate face.

  3. 03

    Filter

    Open aperture keeps flow high through the cycle.

  4. 04

    Discharge

    Cake releases with minimal adhesion.

  5. 05

    Check

    Aperture and seams are checked for distortion.

Options and configuration

  • Aperture trial set for new slurries
  • Reinforced edges for coarse cake
  • Cut and fitted to plate
  • Combination with support cloth

Quote request

Get a quotation for the Monofilament Filter Cloth

The product is pre-filled in the form. Add slurry conditions, flow rate and the target cake moisture so the quotation is based on your duty, not a generic model.

We usually reply within one business day.

We use these details only to reply to your enquiry. No marketing lists, no sharing with third parties.