Polyester Filter Cloth
Fine filtration for neutral and mildly acidic duties
PET cloth with tight weaves for pigment, food and fine chemical slurries where filtrate clarity is critical.
- Fibre
- Polyester (PET)
- Weave
- Twill, satin
- Weight
- 350 – 700 g/m²
- Air permeability
- 5 – 120 L/m²/s
Typical configuration shown. Final specifications confirmed on the approved drawing.
Overview
Where this model fits
Polyester cloth is chosen where the filtrate must be clear and the slurry is neutral or only mildly acidic. Tight weaves capture fine particles but need careful cycle control to avoid blinding. Food-grade finishing is available on request.
Technical parameters
Swipe to see all specifications on mobile
| Parameter | Typical configuration |
|---|---|
| Fibre | Polyester (PET) |
| Weave | Twill, satin |
| Weight | 350 – 700 g/m² |
| Air permeability | 5 – 120 L/m²/s |
| pH range | 3 – 9 |
| Temperature | Up to 130 °C |
| Finishing | Standard or food-grade |
Cycle, step by step
- 01
Clarify
Tight weave captures fines at the start of the cycle.
- 02
Build
Cake forms evenly across the drainage face.
- 03
Release
Calendered cloth helps the cake leave the surface.
- 04
Clean
Low-pressure wash removes residual fines.
- 05
Review
Cloth is checked for stretch and seam wear.
Options and configuration
- Calendered surface for improved cake release
- Food-contact compliant finishing
- Cut-to-plate fabrication
- Trial cloth for new slurries
Applied in these industries
Quote request
Get a quotation for the Polyester Filter Cloth
The product is pre-filled in the form. Add slurry conditions, flow rate and the target cake moisture so the quotation is based on your duty, not a generic model.
We usually reply within one business day.
Related models
All filter cloth
Polypropylene Filter Cloth
PP cloth in plain and twill weaves, for mineral, chemical and wastewater duties with a broad pH range.
- FibrePolypropylene (PP)
- WeavePlain, twill
- Weight300 – 650 g/m²
Monofilament Filter Cloth
Single-filament cloth with a defined aperture, for crystalline and coarse solids that release easily.
- FibrePolyamide (PA) or PET monofilament
- WeavePlain, satin
- Aperture50 – 500 µm
BC-MP Membrane Filter Press
Chamber filtration followed by a membrane squeeze stage, for fine and compressible solids where cake moisture matters.
- Filtration area80 – 1000 m² (typical range)
- Plate size800 – 2000 mm
- Chamber count20 – 100