BESTCOME logo

Product lines

Filter Presses, Plates and Filter Cloth

Three product lines that are specified together: the press, the plates inside it and the cloth over them. Start with the line that matches your duty, then compare models on the parameters that matter.

Polypropylene filter plates stacked in a workshop
01 — filter press

Filter Press

Complete presses for solid-liquid separation in mining, chemical, textile, food and wastewater duties. Frame, plates, hydraulics and control are supplied as one unit.

View all presses
Membrane filter plate surface with drainage grooves
MembraneAutomatic

BC-MP Membrane Filter Press

Chamber filtration followed by a membrane squeeze stage, for fine and compressible solids where cake moisture matters.

  • Filtration area80 – 1000 m² (typical range)
  • Plate size800 – 2000 mm
  • Chamber count20 – 100
View model
Chamber filter press with plates closed and hydraulic ram engaged
ChamberSemi-automatic

BC-CP Chamber Filter Press

A straightforward chamber press for mineral, ceramic and general industrial slurries with predictable filtration behaviour.

  • Filtration area50 – 500 m² (typical range)
  • Plate size630 – 2000 mm
  • Chamber count10 – 120
View model
Hydraulic power unit and frame of a plate and frame filter press
Plate & frameManual

BC-PF Plate & Frame Filter Press

A plate and frame layout for pilot lines, small batches and slurries where cake thickness needs to be varied.

  • Filtration area1 – 60 m² (typical range)
  • Plate size400 – 1000 mm
  • Frame depth20 – 50 mm
View model
02 — filter plate

Filter Plates

Plates are the working surface of the press. Material, size, pressure rating and port layout determine cake release, service life and how easily the plate can be replaced.

View all plates
Polypropylene chamber filter plates stacked before installation
PPChamber

PP Chamber Filter Plate

Moulded PP plates in standard sizes, with centre or corner feed and a range of handle options.

  • MaterialPolypropylene (PP)
  • Plate sizes630, 800, 1000, 1250, 1500, 2000 mm
  • Plate thickness50 – 90 mm by size
View model
Close-up of membrane filter plate surface and sealing edge
MembraneHigh pressure

Membrane Filter Plate

A PP carrier with a flexible membrane face, for presses that need a squeeze stage and drier cake.

  • MaterialPP carrier with elastomer membrane
  • Plate sizes800 – 2000 mm
  • Membrane pressure1.0 – 2.5 MPa
View model
Filter cake discharging from plates after a press cycle
RubberAbrasion resistant

Rubber Covered Filter Plate

Rubber-faced plates for elevated temperature and abrasive duties where plain PP wears quickly.

  • MaterialRubber covered steel or PP core
  • Plate sizes630 – 1500 mm
  • Working pressure0.6 – 1.6 MPa
View model
03 — filter cloth

Filter Cloth

Cloth controls clarity of filtrate, cake release and cycle stability. Weave, yarn and air permeability are selected together with the plate type and slurry chemistry.

View all cloth
Polypropylene filter cloth roll with visible weave
PPPlain weave

Polypropylene Filter Cloth

PP cloth in plain and twill weaves, for mineral, chemical and wastewater duties with a broad pH range.

  • FibrePolypropylene (PP)
  • WeavePlain, twill
  • Weight300 – 650 g/m²
View model
Stainless steel food processing line with filtration equipment
PETTwill weave

Polyester Filter Cloth

PET cloth with tight weaves for pigment, food and fine chemical slurries where filtrate clarity is critical.

  • FibrePolyester (PET)
  • WeaveTwill, satin
  • Weight350 – 700 g/m²
View model
Coarse filter cake discharging cleanly from a press
PASatin weave

Monofilament Filter Cloth

Single-filament cloth with a defined aperture, for crystalline and coarse solids that release easily.

  • FibrePolyamide (PA) or PET monofilament
  • WeavePlain, satin
  • Aperture50 – 500 µm
View model

Not sure which line to start with?

01

Start from the slurry

Particle size, solids content and pH decide plate type and cloth before press size.

Compare industries
02

Match the plate

Chamber for free-filtering solids, membrane where cake moisture or cycle time matters.

Plate selection
03

Confirm the frame

Floor space, headroom and cycles per shift set plate size and automation level.

Send duty details

Need a model that is not listed?

Frames, plate sizes and port layouts vary between plants. Send the duty sheet or the plate dimensions you are replacing and we will confirm what fits.

Send your duty sheetWhatsApp