BC-PF Plate & Frame Filter Press
For small batches and difficult-to-handle cakes
A plate and frame layout for pilot lines, small batches and slurries where cake thickness needs to be varied.
- Filtration area
- 1 – 60 m² (typical range)
- Plate size
- 400 – 1000 mm
- Frame depth
- 20 – 50 mm
- Feed pressure
- 0.4 – 1.0 MPa
Typical configuration shown. Final specifications confirmed on the approved drawing.
Overview
Where this model fits
Plate and frame presses keep filtration area and frame depth adjustable, which helps pilot plants and multi-product lines. The open frame design makes cloth change and inspection quick. It is a practical choice where batch size changes often or where the slurry is viscous and slow to fill.
Technical parameters
Swipe to see all specifications on mobile
| Parameter | Typical configuration |
|---|---|
| Filtration area | 1 – 60 m² (typical range) |
| Plate size | 400 – 1000 mm |
| Frame depth | 20 – 50 mm |
| Feed pressure | 0.4 – 1.0 MPa |
| Closure | Manual screw or hydraulic |
| Control | Manual |
| Construction | Carbon steel, painted; SS option |
Cycle, step by step
- 01
Assemble
Frames and plates are aligned and clamped.
- 02
Feed
Slurry fills the frame cavity under low pressure.
- 03
Filter
Cake builds in the frame; filtrate leaves through the plate.
- 04
Dismantle
The clamp is released and frames are separated.
- 05
Collect
Cake is removed and the cloth is rinsed for the next batch.
Options and configuration
- Stainless steel wetted parts
- Mobile trolley frame for pilot areas
- Interchangeable frames for batch changes
- Peristaltic or diaphragm feed pump
Applied in these industries
Quote request
Get a quotation for the BC-PF Plate & Frame Filter Press
The product is pre-filled in the form. Add slurry conditions, flow rate and the target cake moisture so the quotation is based on your duty, not a generic model.
We usually reply within one business day.
Related models
All filter press
BC-MP Membrane Filter Press
Chamber filtration followed by a membrane squeeze stage, for fine and compressible solids where cake moisture matters.
- Filtration area80 – 1000 m² (typical range)
- Plate size800 – 2000 mm
- Chamber count20 – 100
BC-CP Chamber Filter Press
A straightforward chamber press for mineral, ceramic and general industrial slurries with predictable filtration behaviour.
- Filtration area50 – 500 m² (typical range)
- Plate size630 – 2000 mm
- Chamber count10 – 120
BC-AP Automatic Filter Press
An automated press for plants running frequent cycles, with plate shifting, drip tray and PLC sequence control.
- Filtration area50 – 800 m² (typical range)
- Plate size1000 – 2000 mm
- Chamber count30 – 120